Home      Up

AHTS Upperworks Build

 

 

Superstructure walls 1

Superstructure walls 1

Like the base I originally cut the sides from the redundant parts of the sheets in the kit as seen at the top here. However even with the milled lines inside the thinness of those parts concerned me in case they became noticeable at some point - eg. strange things could happen when the sun cooks the boat. So I recut them from virgin 1.5mm card - lower. All the markings are on the inside faces.

4(33)

Copyright Mike Sheridan, 2012-2013

Created with Web Picture Creator 1.8