Home      Up

HO Rolling Stock

 

 

Slag cars 2

Slag cars 2

This shows the clearance at the back of the cog. Note that it's the small pin that is removed from this cog - not the big one that fits into the pot holder.
In order for the cogwheels to move freely I found it neccessary to make some other clearances bigger. One is the slots at the back of the cog-rack which the flange of the cogwheel runs in - I used a junior hacksaw and small files to enlarge this until the wheel ran easily up and down the rack and was vertical. Various other small blemishes in the plastic wheel may need addressing as well.

15(21)

Copyright Mike Sheridan, 2003-2012

Created with Web Picture Creator 1.8